This late production BOSCH 0 265 200 040 has ditched the redundant ground (pin #8) on the main chassis connector, and again on the solenoid relay which is characterized by 4 pins unlike the 5 pin used on early models. The solenoids on this pump are specific to the 040 series of pumps. The upper manifold plate has lost the bosses for top facing ports found on other models and now sports a sleek upper top plate. The primary difference between the LATE040 and the MID040 is the addition of cosmetic sleeves made of aluminum that cover the solenoid frames. The sleeves are often not salvageable from core pumps due to galvanic corrosion and as such they do carry a modest premium over non sleeved pumps. The cover shroud and chassis wiring hold down are secured with T15 Torx screws
